 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
HM
Schooner Pickle
Heritage Series
Page 2 of 12 
| HM
Schooner Pickle |
Model designed entirely in-house by Rich, Dave and John.
 |
Keel and bulkhead assembly. |
 |
The profiled slot in the lower aft face of bulkhead 9 denotes the 'true' lower face of this bulkhead. The 'extra' material beneath (top picture) should be tapered form the forward face back to this slot (lower picture), this method provides ample surface area for the stern end of the hull planking to terminate against. |
 |
|
 |
View of the plank termination patterns temporarily fitted prior to tapering, note that the profiled slot faces outboard to facilitate their removal above this point upon completion of the planking. |
 |
Plan view of the gunport pattern former, showing the un-bevelled bulkheads (above), and the bevelled bulkheads (below). |
 |
|
 |
View of the gunport pattern former with the gunport pattern fitted, note that although the gunport pattern follows the curve of the former it does not follow the upper edge. Instead, it follows the upper edges of the bulkhead stubs. |
 |
Model designed entirely in-house by Rich, Dave and John.
If you have any ideas/suggestions, either for this kit or future kits
you'd like to see developed why not let us know by emailing us at: suggestions@jotika-ltd.com
To receive notification of updates to this web site email us at:
webupdate@jotika-ltd.com
|
Page 1 |
Page 3 |
