Glass reinforced plastic hull with a stainless steel stem and keel
locked into the moulding. Stainless steel stern post and propeller
guard, moulded rudder, bronze propeller with stainless steel shaft,
running in brass stern tube with bronze bearings. Pre-cut plywood
building stand, deck, deck beams and stringers, chart house frame
and saloon roof. Strip spruce in various sizes. Lime strip for the
laid deck. Sheets 0.8mm pear for the construction of the hatches,
chart house, engine room hatch and skylight and the saloon. A tool
is provided to produce the panel beading. Pear in various sizes and
sections is also provided. The two ships boats have moulded hulls
and are provided with all parts to finish them, including oars, cast
brass rowlocks, boat hook ends, gudgeons and pintles, and cast gratings.
Several sheets of acid etched brass for both construction and fine
detail. Nearly 400 cast or machined brass fittings. Parts to build
a full set of working copper navigation lights and an anchor light.
Lengths of brass rod, tube, angle and 'T' section. Cordage for rigging
etc. There are 6 x AO sheets of drawings including two sheets of full
size general arrangement drawings. 8 x A3 and 4 x A4 sheets of colour
illustrations and an instruction manual. The model displaces 24 lbs.,
(10.8 kilos). The completed model from the kit weighs 12 lbs., (5.4
kilos). There is therefore 12 lbs., (5.4 kilos), of displacement for
the propulsion unit, batteries radio, etc. The model is suitable for
either steam or electric power. Neither of these is included.
NO STEAM PLANT SUPPLIED