 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
HM
Brig Badger
Nelson's
First Official* Command
Nelsons Navy
Page 8 of 10 
| HM
Brig Badger Horatio Nelsons First Official Command |
* Although Nelson had captained both an unnamed sloop in November 1777 and
the Schooner Little Lucy until early 1778, these were not official commands.
As custom dictates, Nelson was referred to as Captain while in charge of these
ships but he was not in 'command'. This is due to the fact that Nelson, although
he had passed his Lieutenant’s exam in April 1777, was still a non-commissioned
officer (second-lieutenant) and was deemed only to have control or charge
of the ship but not command per se.
According to the most technical definition of the word, the only persons able
to exercise command in a military are commissioned officers. This is because
commissioned officers derive authority directly from a sovereign power and,
as such, hold a commission charging them with the duties and responsibilities
of their specific office or position.
While in control of both the unnamed sloop and the Schooner Little Lucy, command
remained with Captain William Locker of the 32-Gun Frigate Lowestoffe - the
ship which Nelson was tending.
Nelson was promoted to the commissioned officer status of Lieutenant on 31st
December 1778, when he was commissioned to Badger, thus Badger became his
first command.
Model designed entirely in-house by Rich, Dave and John.
HM Brig Badger as fitted during Nelson's charge, December 8 1778 - June 19
1779.
Her armament includes 12 x 4pdr cannon and 2 x 0.5pdr swivel guns.
 |
To aid both the beginner and expert modeller in shaping the masts and yards, they are designed to be built in several component parts that are doweled/pinned together. With the dowel centering jig included in the kit this process is now simpler than ever! |
 |
|
 |
|
 |
Lower shroud deadeyes and lanyards, complete with shroud pinrail and authentic belaying pins. |
 |
Backstay lanyards. |
 |
Main stay lanyard. |
 |
Topmast shroud lanyards. |
 |
Rigging of the ratlines with clove hitch knots. |
 |
Belaying of the main topmast stay and main topmast preventer stay with blocks and tackles at the foremast base. |
Model designed entirely in-house by Rich, Dave and John.
If you have any ideas/suggestions, either for this kit or future kits
you'd like to see developed why not let us know by emailing us at: suggestions@jotika-ltd.com
To receive notification of updates to this web site email us at:
webupdate@jotika-ltd.com
|
Page 7 |
Page 9 |
